Volume 47, No 4, 2025
Contents:
Determination of the Optimum Angle for the Sealing Element of Improved Gate Valve
Jamaladdin Aslanov, Khalig Mammadov
Tribology in Industry, Vol. 47, No. 4, pp. 603-612, 2025
DOI: 10.24874/ti.1910.02.25.04
Study on the Mechanical, Morphological and Wear Rate of Jute Cellulose-Reinforced Composites
Challa Karunakar, Chada Radhika
Tribology in Industry, Vol. 47, No. 4, pp. 613-622, 2025
DOI: 10.24874/ti.1955.06.25.08
Mathematical Modeling and Multi-Criteria Optimization in Dry Turning for Enhanced Functional Surface Using Bearing Area Curve
Amine Hamdi, Hammoudi Abderazek, Sidi Mohammed Merghache, Abdelhak Haroun, Tallal Hakmi
Tribology in Industry, Vol. 47, No. 4, pp. 623-639, 2025
DOI: 10.24874/ti.1968.06.25.09
Enhancement of Wear Resistance in 3D-Printed PLA and CF-PLA/Epoxy Composites via Taguchi Design and ANOVA
Salwa A. Abed, Ahmed M. Kadhim Al-Khafaji, Muammel M. Hanon
Tribology in Industry, Vol. 47, No. 4, pp. 640-648, 2025
DOI: 10.24874/ti.1992.07.25.09
Enhancing Engineering Applications with Glass Fiber-Reinforced Polymer Composites: A Comprehensive Assessment of Manufacturing Techniques and Performance Properties
Pratibha M. Karandikar, Nilesh C. Ghuge, Laxman B. Abhang
Tribology in Industry, Vol. 47, No. 4, pp. 649-662, 2025
DOI: 10.24874/ti.1920.03.25.07
Tribological Aspects of Operation of Hydraulic Fluids
Zdenko Tkác, Daniel Skladaný, Martin Nagy, Ján Kosiba,
Liudmyla Hanushchak-Yefimenko, Tetiana Bukoros, Martin Ee,
Marek Halenár
Tribology in Industry, Vol. 47, No. 4, pp. 663-672, 2025
DOI: 10.24874/ti.1942.04.25.09
Numerical Investigation of Slip Effects and Cavitation in Hydrodynamic Thrust Bearing with Circumferential Pocket Geometry
Imam Syafaat, Agung Nugroho, Nur Kholis,
Muhammad Abdul Wahid, Helmy Purwanto, Riky Setiyanto,
Santhi Wilastarib, Muchammad Muchammad
Tribology in Industry, Vol. 47, No. 4, pp. 673-691, 2025
DOI: 10.24874/ti.1991.07.25.11
Eco-Friendly Ni-P-TiO2 Composite Coatings on AH36 Steel Using Plant-Extracted Nanoparticles for Marine Corrosion Resistance
Ganta Suresh, T. Vinod Kumar, R. Muraliraja, A. Padmapriya
Tribology in Industry, Vol. 47, No. 4, pp. 692-704, 2025
DOI: 10.24874/ti.2023.09.25.11
Design of Triaxial Impact Wear Tester: Finite Element Simulation for Performance Analysis of AA6061-T6 Alloy
Muhammed Raşit Karakoca, Ahmet Emrah Erdoğdu
Tribology in Industry, Vol. 47, No. 4, pp. 705-717, 2025
DOI: 10.24874/ti.1979.07.25.09
Fullerene C60 Versus Synthetic Based Oils on Compression Piston Ring Tribology
Elias Tsakiridis, Pantelis Nikolakopoulos
Tribology in Industry, Vol. 47, No. 4, pp. 718-731, 2025
DOI: 10.24874/ti.2011.08.25.09
Study on the Effect of Laser Cleaning Power and Scanning Frequency on Surface Properties and Coating Adhesion of ASTM A36 Steel
Eko Sasmito Hadi, Ahmad Fidaus, Untung Budiarto,
Muhammad Raaflie Caesar Putra Hadi, Rafigo,
Mohammad Tauviqirrahman, J. Jamari
Tribology in Industry, Vol. 47, No. 4, pp. 732-742, 2025
DOI: 10.24874/ti.1754.07.25.11
Experimental Study on Rubber-Granite Friction in Dry and Contaminated Contact
Ionut Marius Nazarie, Ilie Musca, Ionut Cristian Romanu,
Irina Besliu-Bancescu
Tribology in Industry, Vol. 47, No. 4, pp. 743-752, 2025
DOI: 10.24874/ti.2040.10.25.11
Effect of Waviness Contact on Sliding Friction of the Piston-Cylinder System in Mixed Lubrication
Mohamed Benbrik, Mohamed Bouzit, Miloud Tahar Abbčs,
Patrick Maspeyrot
Tribology in Industry, Vol. 47, No. 4, pp. 753-767, 2025
DOI: 10.24874/ti.2021.09.25.11
Enhancement of Steady-state Performance of Hydrodynamic Journal Bearings Using Macro-groove Textures with Lubricant Additives
Arun Bangotra, Sanjay Sharma
Tribology in Industry, Vol. 47, No. 4, pp. 768-791, 2025
DOI: 10.24874/ti.1951.05.25.09
Machinability of Normalized and Stress-Relieved C45 Steel in Dry Internal Turning
Henrique Oliveira Santos, Mickaela Ramos Barbosa,
Carlos Eduardo dos Santos, Marcello Rosa Dumont
Tribology in Industry, Vol. 47, No. 4, pp. 792-805, 2025
DOI: 10.24874/ti.2015.09.25.11
