Volume 48, No 2, 2026
Contents:
Finite Element Analysis on Abrasive Wear Behavior of SKD 11 Tool Steel with Ti and Cr Based
Hard Coatings: Material Selections
Riki Hendra Purba, Deva Ihsan Khoirunas, Kenta Kusumoto
Tribology in Industry, Vol. 48, No. 2, pp. 211-221, 2026
DOI: 10.24874/ti.2048.10.25.12
Effect of GnPs on Erosion Wear of BFRP Composite Pipes Under High Temperature Conditions
Mehmet Bagci, Musa Demirci, Seyit Mehmet Demet,
Harun Sepetcioglu
Tribology in Industry, Vol. 48, No. 2, pp. 222-236, 2026
DOI: 10.24874/ti.1958.06.25.11
Optimized Supervised Machining Learning-Based Energy Efficient Optimization of Roller Burnishing Process
An-Le Van, Minh-Thai Le, Truong-An Nguyen, Thai-Chung Nguyen, Huu-Toan Bui,
Huu-Phan Nguyen, Trung-Thanh Nguyen
Tribology in Industry, Vol. 48, No. 2, pp. 237-250, 2026
DOI: 10.24874/ti.2028.09.25.12
Optimization of Palm Oil Ester-Based Bio-lubricant Composition as Automotive Engine Oil by WASPAS Method
Norhanifah Abdul Rahman, Mohamad Ali Ahmad, Jaharah A. Ghani,
Muhamad Aidil Tasnim Roslan, Nor Husna Mislan
Tribology in Industry, Vol. 48, No. 2, pp. 251-262, 2026
DOI: 10.24874/ti.2065.11.25.02
On the Probability of Melting on Sliding Surface of AISI 1020 Steel in Dry Sliding Against Quenched AISI 1045 Steel Under Electric Current
Marina Ivanovna Aleutdinova, Viktor Veniaminovich Fadin
Tribology in Industry, Vol. 48, No. 2, pp. 263-273, 2026
DOI: 10.24874/ti.2056.10.25.01
A Review of Artificial Intelligence Enabled Digital-Twin Technologies in Tribology
Raj Shah, Mathew Stephen Roshan, Vikram Mittal
Tribology in Industry, Vol. 48, No. 2, pp. 274-293, 2026
DOI: 10.24874/ti.2096.12.25.03
Tribological Characteristics of Cooking Oil Waste-Based Lubricants with TiO2 Nano Powder Additives on Aluminum 6061
Dewi Ambarwati, Poppy Puspitasari, Diki Dwi Pramono,
Muhammad Kozin, Tadiwa Elisha Nyamasvisva,
Ibrahim Dauda Muhammad
Tribology in Industry, Vol. 48, No. 2, pp. 294-308, 2026
DOI: 10.24874/ti.2049.10.25.02
Three Body Abrasive Wear Behaviour of Talc-Filled Short Glass Fiber Reinforced Nylon66 Polymer Composites
S.M. Vinu Kumar, A.T. Ravichandran, B. Harshavardhan,
C. Sasikumar, J.P. Rishi, S. Suresh Kumar
Tribology in Industry, Vol. 48, No. 2, pp. 309-323, 2026
DOI: 10.24874/ti.2125.02.25.03
Response Surface Modelling of Friction and Wear Behaviour of Nano-Enhanced Peltophorum Pterocarpum Biodiesel under Boundary Lubrication
T. Dayananda Murthy, H. Yogish, N.S. Kumaraswam,
R. Pavankumar
Tribology in Industry, Vol. 48, No. 2, pp. 324-338, 2026
DOI: 10.24874/ti.2168.03.26.06
Semi-Empirical Modeling of Surface Roughness in Turning
Miroslav Radovanovic
Tribology in Industry, Vol. 48, No. 2, pp. 339-351, 2026
DOI: 10.24874/ti.2070.11.25.03
Optimizing Machinability and Surface Integrity of Aluminum Alloys 6061 Using Grey Relational Analysis in Turning Operations
Abduljabar H. Ali, Osamah F. Abdulateef, Wassan S. Abd Al-Sahb,
Hiba K. Hussein, Basma L. Mahdi, Oday I. Abdullah
Tribology in Industry, Vol. 48, No. 2, pp. 352-365, 2026
DOI: 10.24874/ti.2123.01.26.04
Composition-Dependent Stability and Tribological Performance of Biodiesel-Derived Hybrid TiO2/MoS2 Tribofluids Based on a Peltophorum pterocarpum and Waste Cooking Oil Methyl Ester Blend
T. Dayananda Murthy, H. Yogish, N.S. Kumaraswam,
R. Pavankumar
Tribology in Industry, Vol. 48, No. 2, pp. 366-378, 2026
DOI: 10.24874/ti.2190.04.26.06
Tribological Analysis of Traction Enhancement in Rope-Plate Conveyors Using Shock-Absorbing Idlers
Kadirbek Baizhumanov, Turgara Tusseyev, Mergen Zhumanov,
Ayezhan Turdaliev
Tribology in Industry, Vol. 48, No. 2, pp. 379-391, 2026
DOI: 10.24874/ti.2175.04.26.06
Predictive Modeling and Parametric Analysis of Three-Body Abrasive Wear in Hybrid CNF-GF/PPS Nanocomposites
Y.C. Arun, R. Ravishankar, B. Suresha, V.G. Pradeep Kumara,
M.N. Thejaswini, V.M. Mahesh
Tribology in Industry, Vol. 48, No. 2, pp. 392-417, 2026
DOI: 10.24874/ti.2157.03.26.05
A Review of Failure Mechanisms, Simulation and Testing Methods in the Marine Transmission Systems Context
Aerk Dimri, Adil Saeed, Zulfiqar Ahmad Khan,
Muhammad Qasim Shah
Tribology in Industry, Vol. 48, No. 2, pp. 418-435, 2026
DOI: 10.24874/ti.2208.05.26.06
